-
Product Description
-
About this item
- Ultralight Carbon Fiber: Made of full 3K T800 carbon fiber -- as known as "black gold" in the industry, Light weight, never rust.
- Size: Φ27.2 × 350mm (apx. 220g/pc), Total length: 350mm, Tube Length: 325mm, Head Length: 25mm. Strength: maxium of 220lbs ; Setback: 0mm. Adjust tube length of 0 to 320mm.
- How to Choose Yours: You need to either check your INTERNAL diameter or check the specs on your original seat tube or bike.
- Adjustable Seat Angle: The seat angle is controlled by how the bolts are tensioned. You can probably get a pretty steep angle by loosing the rear bolt and tightening the front bolt. The recommended maximum torgue force would be 7 Nm, or else the cracks may occur.
- Wide Application: Suitable for most mountain bikes, road bikes, fixed gear bicycle, downhill bikes, track bikes, MTB, BMX, DH, etc.
Product Description
![TPard]()
![Carbon Bike Seatpost]()
Carbon Bike Seatpost
![Carbon Bike Seat Post]()
TPard Carbon Seatpost
- Appearance: Matte Carbon
- Material: T800 Carbon Fiber + Aluminum Alloy
- Tube Diameter: 27.2 / 31.6mm (optional)
- Tube Length: 350mm
- Max. Torgue Force: 7 Nm
- Weight: 230 ± 20g
- Finish: 3K Matte
- Usage: Mountain Bikes, Road Bikes, Downhill Bikes, MTB, BMX, DH, etc.
Carbon Bike Seat Post
- Ultralight
- High-strength
- Non-deformable
- Corrosion resistant
- Stylish appearance
Why Chose Carbon Seat Tube:
As a new material in the industry, it's known by calling it "Black Gold" because of its excellent performance. Carbon fiber has a density less than one quarter of density of steel, but its strength is 5-7 times.
![Carbon Bike Seatpost]()
![Carbon Bike Seat Post]()
Adjustable Saddle Angle
The angle of your bike seat can be adjusted by tightening one end of seatpost head to “pull it down” or loosen other end to “tip it up” when getting your angle set to where you want it, simply snug both bolts EQUALLY to torque spec. The design of adjusting seat cushion angle can get you a more comfortable riding.
![bike seat post]()
Lightweight yet High-strength
The structure of carbon tube body + aluminum alloy tube head + aluminum alloy clamp base weighs only 230g±20g. Yet it still has the feature of high-strength, which means you still get a safe long-riding while reducing every unnecessary load on your bicycle.
![Bicycle Seat Post]()
Security Line
Each one seatpost tube body has an installation security line, please make sure the part under that line is totally inserted into the bike frame tube hole, or else cracks may occur.
How to Install?
![Carbon Bike Seatpost]()
1. Loosen the front buckle.
![Carbon Bike Seatpost]()
2. Align the clip groove with the dual-rails and clamp the buckle down.
![Carbon Bike Seatpost]()
3. Adjust your seat to the right angle you want and screw it tight.
![Carbon Bike Seatpost]()
4. Installation complete, easy-peasy.
How to Chose Your Size?
![Bike Seat Pole]()
Please kindly check the available seat post size of your bicycle before purchase.
Notice:
1. Please use a torque wrench as far as possible for installation, the maximum torgue force of carbon seat tube is 7Nm, exceeding it may lead to cracks.
2. Suitable for most of dual-rail bike seat (the center distance between the two rails is 43mm) such as 7*7 carbon rails, 6*6 steel rails, 7*7 Cr-Mo rails and other saddles.
3. Please make sure that the part of seat tube body under safety line is totally inserted into the bike frame tube hole, or else cracks may occur.
